Synchro/Analog Converter - SLDC5C Series - Takuwa Vietnam - STC Vietnam

Công ty  TNHH TM DV Song Thành Công (STC)

Chúng tôi là công ty hàng đầu chuyên về Xuất Nhập Khẩu các thiết bị như: Cảm biến, Encoder, Relays, PLC, HMI, Inverter,Thiết bị đo nhiệt độ, áp suất, lưu lương, đo mức, motor, Pump…

Hãy liên hệ với chúng tôi để được hỗ trợ tốt nhất!

Đoàn Thị Xuân Hảo

I Cellphone I     :     0169.868.0915

 

I Email I            :  hao@songthanhcong.com

Nick Yahoo         :   hao_stc                          Nick Skype  : hao_stc

Loại sản phẩm: Synchronous Motor

Mã sản phẩm: Synchro/Analog Converter (SLDC5C Series)

Hãng sản xuất: Takuwa

Giá : Vui lòng liên hệ

SLDC5C series is, a data converter from the synchro into the analog.

      

Features

• ・Suitable for syntonic speed control
• ・Compact size
• ・Easy zero adjustment by one touch button
• ・Function with upper limit, addition

Available sites

• 　・Control for industrial equipment

Main Specification

Power supply input		AC90～242V、50/60Hz
Internal power consumption		14VA or less
Input	Signal	Synchro 3-wire signal 　MAX.AC90V、50/60Hz
	Method of insulation	Transformer insulation
	Impedance	100kΩ or more
Follow-up speed		100r/min
Deviation voltage output Vε	Voltage signal	DC0V～5V、DC0V～10V、DC0V～±5V、DC0V～±10V
		（select from mode switch）
	Accuracy	±0.1%F.S（Span width 270°～360°）
	Temperature coefficient	±0.005%F.S／℃（Span width 270°～360°）
	Load resistance	3kΩ or more
	Output adjustment range	±30°～ ±180°(at synchro angle)
Speed control output Vo	Voltage signal	Vo=Vε＋Vs
	Load resistance	3kΩ or more
Setting voltage input Vs	Setting voltage level	DC-10V～+10V
	Input impedance	3kΩ or more
Comparison signal output	Output form	No voltage "a" contact (Photo MOS relay output)
	Output rating	50V（AC／DC）、0.1A
	Logic	“feasible”＝ON, “Not feasible”＝OFF
Present value correction function	Function	The deviation voltage output Vε at an arbitrary position can be adjusted to the correct (preset corrected position) ・Dedicated to zero point correction 1 point 　(correction by means of the front zero adjustment switch) ・Arbitrary position correction 1 point 　(correction by means of external correction input)
	Correction range	-180.00°～ 179.91°(at synchro angle)
	External correction signal input	No voltage contact signal or open collector input signal
		Vcc＝+12V、IF＝2mA（typ）
Forward/Reverse switching function	Function	To invert the polarity of the deviation voltage output Vε
	Signal input	No voltage contact signal or open collector input signal
		Vcc＝+12V、IF＝2mA（typ）
Insulation resistance		Between power supply input terminals R1/R2 connected together and FG: 500 VDC; 10 MΩ or more when using an insulation resistance meter
Dielectric strength voltage		Between power supply input terminals R1/R2 connected together and FG: 1500 VAC for 1 minute
Ambient operating temperature		0℃～+55℃
Ambient operating humidity		30 ～ 90%RH; there shall be no condensation.
Vibration resistance		Compliant with JIS C 60068-2-6
		(20 m/s2, 10 ～ 55 Hz; 10 times in each axial direction)
Shock resistance		Compliant with JIS C 60068-2-27
		(150 m/s2, 11ms; for each axis, 3 times each in both　directions)
Painting		Munsell N1.5 half gloss
External dimensions		136mm(H)×72mm(W)×110mm(D)
Weight		2.0kg以下